Super User

Super User

Special Flexible Metal Hose

jacket hose assembly

Special Flexible Metal Hose

 

 

 Jacketed Assembly

 

When conveyants must be maintained at a specified temperature, steam jacketing is used frequently, often in lieu of electric tracing.

 

 

Tracers

Traced assemblies are similar in concept to jacketed assemblies in that there is an inner, smaller diameter hose encased by a single large diameter hose. Where jacketed assemblies surround the media with heat or cold, traced assemblies have the media surround the hose containing the heating or cooling element. The tracer, or inner hose, may also be installed in a long 'U' shaped loop within the outer hose, with the steam inlet and outlet at the same end of the assembly.

 

 

Guarded Assembly

Use of an external flexible armor protects metal hose from abuse due to rough handling, abrasion and bending below it's limits. Often a rubber cover can accomplish this as well as armor if temperatures will permit

 

 

Lined Assembly

If high conveyant velocities are required, use of an internal flexible metal liner will prevent damage and reduce abrasion problems. 

Flexible Metal Hose

Flexible Metal Hose

Flexible Metal Hose

Welded Pipe End with 37-1/2 degree bevel_Flexible Metal Hose

Welded Pipe End with 37-1/2 degree bevel

Size Availability: 1/8"diameter to 12"diameter

Material Availability: Carbon Steel,T304Stainles Steel,T304L Stainless Steel,T321Stainles Steel, T316Stainles Steel,T316L Stainless Steel

Schedule Availability: 5,10,40,80,160,XX

Note:Not all sizes and schedules are available in combination - consult factory for details

Welded Concentric Reducer_Flexible Metal Hose

Welded Concentric Reducer

Size Availability: 1/2"diameter to 12"diameter

Material Availability: Carbon Steel,T304Stainles Steel,T304L Stainless Steel,T321Stainles Steel, T316Stainles Steel,T316L Stainless Steel,Monel 400,Has talloy,Incoloy,Inconel

Schedule Availability: 5,10,40,80,160,XX

Note:Not all sizes and schedules are available in combination - consult factory for details

Welded Long Radius 90 Degree Elbow_Flexible Metal Hose

Welded Long Radius 90 Degree Elbow

Size Availability: 1/2"diameter to 12"diameter

Material Availability: Carbon Steel,T304Stainles Steel,T304L Stainless Steel,T321Stainles Steel, T316Stainles Steel,T316L Stainless Steel,Monel 400,Has talloy,Incoloy,Inconel

Schedule Availability: 5,10,40,80,160,XX

Note:Not all sizes and schedules are available in combination.Short radius,45'sand other angles are available - consult factory for details

Welded NPT male nipple_Flexible Metal Hose

Welded NPT male nipple

Size Availability: 1/8"diameter to 8"diameter

Material Availability: Carbon Steel,T304Stainles Steel,T304L Stainless Steel,T321Stainles Steel, T316Stainles Steel,T316L Stainless Steel

Schedule Availability: 5,10,40,80,160,XX

Note:Not all sizes and schedules are available in combination - consult factory for details

NPT Male Nipple with Integral Hex Nu_Flexible Metal Hoset

NPT Male Nipple with Integral Hex Nut

Size Availability: 1/4"diameter to 2"diameter

Material Availability: Carbon Steel,T304Stainles Steel,T304L Stainless Steel,T321Stainles Steel, T316Stainles Steel,T316L Stainless Steel,Monel 400,Has talloy,Incoloy,Inconel

Schedule Availability: 5,10,40,80,160,XX

Note:Not all sizes,schedules and materials are available in combination - consult factory for details

NPT male with welded on Hex Nut_Flexible Metal Hose

NPT male with welded on Hex Nut

Size Availability: 1/2"diameter to 4"diameter

Material Availability: Carbon Steel,T304Stainles Steel,T304L Stainless Steel,T321Stainles Steel, T316Stainles Steel,T316L Stainless Steel,Monel 400,Has talloy,Incoloy,Inconel

Manufactured from hexagon bar stock.

Note:Not all sizes,and materials are available in combination - consult factory for details

Welded Plate Flange ANSI Class 150 drilling_Flexible Metal Hose

Welded Plate Flange ANSI Class 150 drilling

Size Availability: 1/2"diameter to 12"diameter Material Availability: Carbon Steel and Stainless Steel

Raised Face Slip-On Flange on Pipe End_Flexible Metal Hose

Raised Face Slip-On Flange on Pipe End

Size Availability: 1/2"diameter to 12"diameter

Material Availability: Carbon Ste l,T304Stainles Ste l,T304L Stainles Ste l,T321Stainles Ste l, T316Stainles Ste l,T316L Stainless Ste l,Monel 40 ,Hastalloy,Inconel

Schedule Availability: 5,10,40,80,160,X

ANSI Class Ratings: 150,300,600,900,1500,2500

RTJ flanges also available - consult factory for details

Note:Not all sizes and schedules are available in combination - consult factory for details

Welded Raised Face Weld neck Flange_Flexible Metal Hose

Welded Raised Face Weld neck Flange

Size Availability: 1/2"diameter to 12"diameter

Material Availability: Carbon Ste l,T304Stainles Ste l,T304L Stainless Ste l,T321Stainles Ste l, T316Stainles Ste l,T316L Stainless Steel,Monel 40 ,Hastalloy,Incoloy,Inconel

Schedule Availability: 5,10,40,80,160,X

ANSI Class Ratings: 150,300 ,600 ,900 ,1500 ,2500

RTJ flanges also available - consult factory for details

Note:Not all sizes and schedules are available in combination - consult factory for details

Lap Joint Floating Flange with Type A MS stub end_Flexible Metal Hose

Lap Joint Floating Flange with Type "A" MS stub end

Size Availability: 1/2"diameter to 12"diameter

Material Availability: Carbon Ste l,T304Stainles Ste l,T304L Stainless Ste l,T321Stainles Ste l, T316Stainles Ste l,T316L Stainless Ste l,Monel 40 ,Hastalloy,Incoloy,Inconel

Schedule Availability: 5,10,40,80,160,X

ANSI Class Ratings: 150,30 ,60 ,90 ,150 ,250

Note:Not all sizes and schedules are available in combination.

Type "C"stub ends are also available - consult factory for details.

Welded Female Union_Flexible Metal Hose

Welded Female Union

Size Availability: 1/2"diameter to 4"diameter

Material Availability: Carbon Ste l,T304Stainles Ste l,T304L Stainless Ste l, T316Stainles Steel, T316L Stainless Steel

Pressure: 150,300 ,3000,6000pound

 

Welded Female NPT Half Pipe Coupling_Flexible Metal Hose

Welded Female NPT Half Pipe Coupling

Size Availability: 1/2"diameter to 4"diameter

Material Availability: Carbon Ste l,T304Stainles Ste l,T304L Stainless Ste l,T321 Stainless Steel , T316Stainles Ste l,T316L Stainless Ste l,Monel 40 ,Hastalloy,Incoloy,Inconel

Pressure: 150,300 ,3000,6000pound

Note:Not all sizes and Pressures are available in combination.

Female NPT Full Pipe Coupling is also available - consult factory for details

Welded JIC Swivel Female_Flexible Metal Hose

Welded JIC Swivel Female

Size Availability: 1/4"diameter to 2"diameter Material Availability: Carbon Steel &T316Stainles Steel

Welded Quick Disconnect Female Part D Coupling_Flexible Metal Hose

Welded Quick Disconnect Female Part "D" Coupling

Size Availability: 1/2"diameter to 8"diameter

Material Availability: Carbon Steel &T316Stainles Steel,Has telloy

- Other materials are available - consult factory for details Note:Not all sizes and materials are available in combination - consult factory for details

 

 

Welded Quick Disconnect Male Part A Camlock_Flexible Metal Hose

 

Welded Quick Disconnect Male Part "A" Camlock

Size Availability: 1/2"diameter to 8"diameter

Material Availability: Steel,T316Stainless Steel and Has telloy

- other materials available - consult factory for details Note:Not all sizes and materials are available in combination - consult factory for details

 

 

Helical Hose Construction in Profile with Single Layer of Braid

 

Annular Hose Construction in Profile With Single Braid

 

Flexible Pump Connector

Flexible Pump Connector

Flexible Pump Connector

 

Specifications

Stainless Steel Hose

Single Stainless Braid

Male NPT Schedule 40 Carbon Steel Fittings

 

Options

Bronze Hose & Braid

Stainless Steel Fittings

Schedule 80 Fittings

Hex Nut Fittings

Double Braided For Higher Pressure

I.D (in.)

Overall Length

Max. W.P. At Room Temp. (psi)

Approx. Wt. (lbs.) Per Unit

1/2

6-1/2"

950

1/2

3/4

7"

700

1

1

8"

550

1

1-1/4

8-1/2"

420

1-1/2

1-1/2

9"

380

2

2

10-1/2"

300

2-1/2

2-1/2

12"

300

2-1/2

3

14"

250

4

4

16"

200

4-1/2

Corrugated Bore Teflon Hose

Corrugated Bore Teflon Hose

C-Flex Corrugated Bore Teflon Hose

Construction

Inner: Corrugated PTFE

Cover:SS Wire Braided

Temperature Range: -100F(-73°C) to 500°F(260°C)

ID(inch)

OD(inch)

Working Pressure(PSI)

Burst Pressure(PSI)

Minimum Bend Radius(inch)

Weight(lbs/ft)

0.37

0.56

1850

7400

2.0

0.23

0.50

0.75

1500

6000

3.0

0.27

0.75

1.01

1300

5200

3.5

0.43

1.00

1.30

1000

4000

4.0

0.63

1.25

1.57

900

3600

4.5

0.75

1.50

1.89

700

2800

4.5

0.88

2.00

2.38

500

2000

5.0

1.11

 

Smoothbore Teflon Hose

Smoothbore Teflon Hose

SM-Flex Smoothbore Teflon Hose

Construction

Inner: Smooth bore PTFE

Cover:SS Wire Braided

Temperature Range: -100F(-73°C) to 500°F(260°C)

ID(inch)

OD(inch)

Working Pressure(PSI)

Burst Pressure(PSI)

Minimum Bend Radius(inch)

Weight(lbs/ft)

3/16

0.23

3000

12000

2.0

0.05

1/4

0.30

3000

12000

2.0

0.06

5/16

0.37

3000

12000

2.3

0.07

5/16

0.45

4350

17400

2.5

0.10

3/8

0.40

2500

10000

3.9

0.09

3/8

0.50

2250

9000

4.5

0.10

1/2

0.52

2000

8000

4.7

0.12

5/8

0.59

1750

7000

5.3

0.15

3/4

0.80

1500

6000

6.5

0.23

3/4

0.89

1100

4400

7.4

0.23

1

1.05

1000

4000

7.8

0.28

1

1.03

1250

5000

9.0

0.48

1

1.18

900

3600

9.8

0.34

1 1/4

1.38

1000

4000

11.0

0.59

 

 

 

Cementing Hose

Cementing Hose

High Pressure Cementing Hose

Tube: NBR, specially compounded for handling abrasive, corrosive and oily drilling mud

Reinforcement: Multiple layers of polyester cord over tube, high tensile steel cables.

Cover: NBR, Specially compounded, resistant to abrasion, corrosion, cutting, gouging, oil and weather.

ID(inch)

WP(PSI)

TP(PSI)

Min. Bending(mm

3

 

5000

 

10000

 

1050

 

10000

 

15000

 

1150

3 1/23 

 

5000

 

10000

 

1100

 

10000

 

15000

 

1200

4

 

5000

 

10000

 

1100

 

10000

 

15000

 

1200

 

 

 

Rotary Decoking Hose

Rotary Decoking Hose

Rotary Decoking Hose

Tube: NBR, specially compounded for handling abrasive, corrosive and oily drilling mud

Reinforcement: Multiple layers of polyester cord over tube, high tensile steel cables.

Cover: NBR, Specially compounded, resistant to abrasion, corrosion, cutting, gouging, oil and weather.

Fitting: Hammer Unions, API Male End, Flanges

Attachment: Safety Clamp & Chain

ID

3"

3 1/2"

4"

Class

A

B

C

D

E

F

G

A

B

C

D

E

F

G

A

B

C

D

E

F

Working Pressure(PSI)

1500

2000

4000

5000

7500

10000

15000

1500

2000

4000

5000

7500

10000

15000

1500

2000

4000

5000

7500

10000

Test Pressure(PSI)

3000

4000

8000

10000

15000

15000

22500

3000

4000

8000

10000

15000

15000

22500

3000

4000

8000

10000

15000

15000

Min. Bending Radius(mm)

950

950

1050

1050

1100

1150

1150

1000

1000

1100

1150

1150

1200

1050

1050

1050

1100

1100

1150

1200

 

 

Choke and Kill Hose

Application: Flexible Connection

Choke and Kill Hose

Tube: Fluoroelastomer , resists abrasion, corrosion, oil, weather and up to 20% H2S

Reinforcement: Multiple layers of polyester cord over tube, high tensile steel cables.

Cover: NBR, Specially compounded, resistant to abrasion, corrosion, cutting, gouging, oil and weather.

Application: Flexible Connection between standpipe and swivel(Rotary Drilling) or between pump and standpipe(Rotary Vibrator) for pumping mud at extra high pressure in oil drilling and exploration work.

Fitting: Hammer Unions, API Male End, Flanges

Attachment: Safety Clamp & Chain

Applicable Standard: API Spec 16C; SY/T5323-2004

 

ID, mm(inch)

WP,MPA(PSI)

BP,MPA(PSI)

Min. Bending Radius(mm)

50.8(2)

35.0(5000)

105.0(15000)

900

64(2 1/2)

1000

76(3)

1000

89(3 1/2)

1100

101.6(4)

1200

50.8(2)

52.0(7200)

70.0(10000)

1950

63.5(2 1/2)

1000

76.2(3)

1050

89(3 1/2)

1150

101.6(4)

1250

50.8(2)

70.0(10000)

157.5(22500)

1000

63.5(2 1/2)

1100

76.2(3)

1150

89(3 1/2)

1200

101.6(4)

1250

50.8(2)

105.0(15000)

236.25(33750)

1000

63.5(2 1/2)

1150

76.2(3)

1200

50.8(2)

138.0(20000)

310.0(45000)

900

64(2 1/2)

1100

76.2(3)

1200

 

 

 

Rotary Drilling Hose

Rotary Drilling/Vibrator Hose

Rotary Drilling/Vibrator Hose

Tube: NBR, specially compounded for handling abrasive, corrosive and oily drilling mud

Reinforcement: Multiple layers of polyester cord over tube, high tensile steel cables.

Cover: NBR, Specially compounded, resistant to abrasion, corrosion, cutting, gouging, oil and weather.

Application: Flexible Connection between standpipe and swivel(Rotary Drilling) or between pump and standpipe(Rotary Vibrator) for pumping mud at extra high pressure in oil drilling and exploration work.

Fitting: Hammer Unions, API Male End, Flanges

Attachment: Safety Clamp & Chain

Applicable Standard: API Spec 7k/ISO14693

ID

2"

2 1/2"

3"

Class

A

B

C

D

E

F

G

A

B

C

D

E

F

G

A

B

C

D

E

F

G

Working Pressure(PSI)

1500

2000

4000

5000

7500

10000

15000

1500

2000

4000

5000

7500

10000

15000

1500

2000

4000

5000

7500

10000

15000

Test Pressure(PSI)

3000

4000

8000

10000

15000

15000

22500

3000

4000

8000

10000

15000

15000

22500

3000

4000

8000

10000

15000

15000

22500

Min. Bending Radius(mm)

800

800

850

850

900

950

1000

900

900

1000

1000

1050

1100

1150

950

950

1050

1050

1100

1150

1150

 

ID

3 1/2"

4"

5"

Class

A

B

C

D

E

F

G

A

B

C

D

E

F

A

B

C

D

Working Pressure(PSI)

1500

2000

4000

5000

7500

10000

15000

1500

2000

4000

5000

7500

10000

1500

2000

4000

5000

Test Pressure(PSI)

3000

4000

8000

10000

15000

15000

22500

3000

4000

8000

10000

15000

15000

3000

4000

8000

10000

Min. Bending Radius(mm)

1000

1000

1100

1150

1150

1200

1050

1050

1050

1100

1100

1150

1200

1200

1200

1300

1300

 

 

Bop Control Hose

the hose for well control—GNG high-pressure

BOP Hose

Application: the hose for well control—GNG high-pressure, fire-resistant and heat-insulation hose assembly is mainly used for the hydraulic control of the BOP for drilling and for hydraulic transmission at high temperature and flammable places in the metallurgic industry.

Classification: high molecular polymer jacket type; stainless steel armored jacket type and braided stainless steel wire jacket type

Standard: API Spec 16D; SY/T5053.2-2002

I.D(mm)

O.D(mm)

W.P(MPA)

B.P(MPA)

Min. Bending Radius(MM)

Thread

Working Time with Fire-Resistance at 750C

Normal

Limit

6.3

24

35

105

130

NPT,LP

5

25

26

70

175

8

28

35

105

140

32

70

175

10

30

35

105

160

34

70

175

12.5

37

35

105

210

43

70

175

16

41

35

105

260

47

70

175

19

44

35

105

280

50

70

175

22

47

35

105

320
Subscribe to this RSS feed

Company

News

Oilfield Hose

Industrial Hose

Metallic Hose

Application